Welding Machine for miniature products

    :: Products

PW-18T Temperature Control Pulse Heat Unit

(Click to enlarge)

            PW-18T is a high frequency inverter welder. It controlled by multi-processor and   power IGBT, which makes             it possible to exercise precise control over applied  voltage, pressure, current and reflow temperature during             each operation.  PW-18T greatly reduce the training period of workers from weeks to just few hours.  On the             environmental side, no chemical solvent and insulation removal is needed,  which also saves costs and             labour. The device? enjoys low voltage (<2.5V)  operations and low energy consumption.


            Spot Welding mode:
             PW-18T is a compact size lead free device capable of handling the welding needs of very fine wires ranging              0.02mm-0.5mm.
             The product utilizes the principle of high temperature welding. Current flowing through the welding tip              creates a high temperature to burn off the wire insulation, and then continues through the exposed wire and              the metal base to weld the two together.

              Welding quality is assured by closed-loop control for welding voltage and current.

            Temperature Control mode:
            W-18T embedded temperture control module, it operate as a Hot Bar Reflow soldering machine. Large             current flowing through the high resistance material such as Mo or W etc. and generate heat. The heat was             controlled by feed back of thermocouple on the heater tip accoring to the preset temperature and time.

             Soldering quality is assured by closed-loop control for welding voltage and temperature.

             Suitable for . . .
              - Replacement for soldering, especially suitable for miniature component, flexible circuits, ribbon cables,                  flex to PCB...
              - Welding (Soldering) with enameled wires. No need for wire stripping.
              - Printed circuit board (PCB) repairs.
              - Welding (Soldering) assortment of electronic components and surface-mounted components.
              - Jobs requiring thin soldering layer.

             Unique Features:
            1. The large touchscreen provides easy access to all weld parameters in addition to a visual representation                  of the weld waveform graph, weld histograms, alarms, and warnings.
             2. Quality of ordinary soldering or even welding jobs can only be visually estimated by tensile? strengths.                  Our unique current and temperature sensing and alert system ensures quality of each welded joint.
             3. Specially designed micro-controller unit (MCU) with 9 programmable weld schedules with sequential
             4. Independent welding current and voltage detect system.
             5. Single or Dual welding pulse output for different products.
             6. Presettable discharge counter and alert syste
             7. All welding data can be recoded in computer througth RS232 port for traceable and SPC purpose.
             8. Electronic pressure sensing technology offers higher precision than comparable products with
mechanical pressure sensing technology

                                                                           Spot Welding mode       Temperature Control mode     
                            Power Input                           220V 50 / 60 Hz                     
                            Welding Voltage                   0.2 ~ 2.50V (Max.) 
                            Welding Current                   10 ~ 1500A (Max.)                          
                            Duty Cycle                             10%                                             
                            Welding Time                        5mS ~ 999mS                      5mS ~ 9.9S   
                            Welding temperature                                                           80 ~ 600  









       Spot Welding Machine

  PW-26/27 Touchscreen
       Spot Welding Machine

  PW-28 Touchscreen
       Inverter Resistance

  PW-18T Touchscreen
       Temperature Control
       Pulse Heat Unit

  PWS-10M Fully Auto
       Spot Welding Machine

  PH Series Weld Head

  Weld TIP

  PT-02 Auto Pull Tester


    :: Contact Us

  Year 2000 (HK) Ltd.

  HK  Address:
Unit A., 33/F., Legend
  Tower, 7 Shing Yip St.,
Kwun Tong,
Hong Kong.

(852) 2191 8803 

(852) 2172 7276 



Wei Shun
  welding equipment  Co, Ltd

4/Floor, Building B, Zhongding
Communication Industrial Zone ,Jinxiaotang
Fenggang Town, Dongguan City, China

(86) 769-8756 8791

(86) 769-8756 5725

(86) 13926816048

  year-cn@vip.163.com                  xjhyear@126.com



                                  Year 2000 (HK) LTD.                                  Dongguan Wei Shun Welding Equipment LTD.
                                   E-mail    : welcome@year.com.hk              E-mail    :  year-cn@vip.163.com  ; xjhyear@126.com                                   
                                   Website  : www.year.com.hk                      Website  :  www.p-weld.com

                                                            东莞市威顺焊接设备有限公司  版权所有©2024 粤ICP备15028172号